Easy Glow

Easy® Glow - Heat Transfer Vinyl

Neon in the light, glows at night.

Have you ever wanted to make a glow in the dark design that was different than the typical eerie green? Enter Easy® Glow: the HTV that glows in the dark - in multiple colors! Featuring a palette of vibrant, neon colors, Easy Glow looks stunning in the daytime on any garment! But where Easy Glow REALLY shines is in the dark. When the lights go out, Easy Glow gives off a luminous appearance in a variety of fluorescent colors! Great for costumes, kid's clothes, and party accessories, Easy Glow is a surefire way to light up your nights!

Easy Glow is 150 Microns / 5.91 Mils and is a PU composition.




Easy Glow Features

Easy Glow Shirt Design
Easy Glow Neon Orange Easy Glow Neon Pink Easy Glow Neon Blue Easy Glow Neon Yellow Easy Glow Neon Green 

Easy Glow applies to:


100% Cotton100% PolyesterPoly/Cotton Blends
100% Cotton100% PolyesterPoly/Cotton Blends

Siser Cutter Settings


Blade: 45°/60°    Force: 5-15    Offset: .250    Speed: 30

Click here to download a .pdf of settings for other cutters.
Settings may vary based on blade condition and age of machine. Always perform a test cut prior to cutting designs.

Application Instructions


Home Iron Instructions

• Set iron dial between Cotton and Linen
• Cover with Heat Transfer Cover Sheet or Multipurpose Paper
• Place on flat, hard surface (ironing board not recommended)
• Press iron with medium/firm pressure (do not slide iron)
• Press each section of design for 15 seconds
• Peel carrier cold/warm
• If areas of design lift after application, replace cover sheet and
re-press for 5-10 seconds

Heat Press Instructions     

• Cover with Heat Transfer Cover Sheet or Multipurpose Paper
• Preheat garment for 2-3 seconds
• Apply design at 305°F/150°C (EasyPress® users add approx. 30°)
• Use medium pressure for 15 seconds
• Peel carrier cold/warm (15 seconds off the press)

Click here for a printable version of all HTV application instructions

Recommended Accessories: Siser Weeder, Multipurpose Paper or Heat Transfer Cover Sheet

Laundering: Wait 24 hours before first wash. Machine wash cold with mild detergent. Tumble dry low. Do not bleach or dry clean.